Loadrite PRO model scale features:
- Operator friendly and simple to use
- Loadrite weighs and accumulates
each load on the move. There's no need to stop and start
- Dynamic final bucket load
adjustment (tip-off)
- Batch weighing
- Blending mode
- Ability to use multiple attachments
on the same loader
- Product totals can be tracked and
processed
- Keypad and display have adjustable
back lighting
- Load information can be printed
and/or stored and then transferred to a computer
Enhanced Features:
- Split weighing of truck and trailer
- Auto target weight by truck ID
- Auto tare weight by truck ID
- Multiple print
- Overload error alarm
- Over-target error alarm
- Reprint last docket
- Language conversion toggle
- Volumetric conversion toggle
- Weight units toggle
- Alarm clock
- Ability to self-test for errors
- Improved personalized data memory
for details such as: customer name, truck number, location, job ID,
etc... (up to 250 entries)
- Optional realtime wireless data
transfer
Technical information:
Power Requirements:
Supply Voltage:
12 to 32VDC (i.e., designed to operate on 12 or 24 volt systems).
Automotive power supply transient suppression exceeds SAE
specifications.
Supply Current: 160mA typical, 350 mA max.
Calibration & Data Backup: Data is stored in a permanent
memory and is not affected when the main power is turned off.
Display/Keyboard:
Display (LCD):
2 lines of 8 characters, used to display operator messages, and prompts
to enter product data etc. Large, highly visible, 5 digit numeric,
to display lifted weight and totals. Display has adjustable back
lighting to suit all lighting conditions.
Keyboard: Alpha numeric. Waterproof tactile membrane. Adjustable
back-light.
Physical:
Indicator:
Water and dust protected to IP54 standard.
Dimensions: W145xL240xD100mm (5.70 x 9.44 x 3.93 inches).
Weight: 1.6kg (3 lbs)
Pressure Transducer: Stainless steel, water and dust protected to
IP67 standard.
Trigger Device: Water and dust protected to IP67 standard.
Vibration: MIL-STD 810D standard.
Environmental:
Ambient Temperature:
OPERATING: -10°C to +50°C (14°F to 122°F) STORAGE: -30°C to +80°C
(-22°F to 176°F) OPERATING AND STORAGE FOR PRESSURE TRANSDUCER AND
TRIGGER: -30°C to +70°C (-22°F to 158°F) HUMIDITY: 20% to 95%
relative humidity.
General:
Clock:
Built-in clock is either AM/PM or 24 hour format and date in
day-month-year format.
Communications: RS232 (Tx1, Tx2, Rx, Busy) for optional printer
and MMS.
